Abstract
Pristine multiwalled carbon nanotubes (P-MWCNTs) were functionalized with carboxylic groups (MWCNT-COOH) through oxidation reactions and then reduced to produce hydroxyl groups (MWCNT-OH). Pristine and functionalized MWCNTs were used to produce poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) nanocomposites with 0.5 wt% of MWCNTs. MWCNT functionalization was verified by visual stability in water, infrared and Raman spectroscopy, and zeta potential measurements. Pristine and functionalized MWCNTs acted as the nucleating agent in a PHBV matrix, as verified by differential scanning calorimetry (DSC). However, the dispersion of filler into the matrix, thermal stability, and direct current (DC) conductivity were affected by MWCNT functionalization. Scanning electron microscopy (SEM) showed that filler dispersion into the PHBV matrix was improved with MWCNT functionalization. The surface roughness was reduced with the addition and functionalization of MWCNT. The thermal stability of PHBV/MWCNT-COOH, PHBV/P-MWCNT, and PHBV/MWCNT-OH nanocomposites were 20, 30, and 30 °C higher than neat PHBV, respectively, as verified by thermogravimetry analysis (TGA). Addition of pristine and functionalized MWCNTs provided electrical conductivity in nanocomposite, which was higher for PHBV/P-MWCNTs (1.2 × 10−5 S cm−1).
Similar content being viewed by others
References
C. Xu and Z. Qiu: Nonisothermal melt crystallization and subsequent melting behavior of biodegradable poly (hydroxybutyrate)/multiwalled carbon nanotubes nanocomposites. J. Polym. Sci., Part B: Polym. Phys. 47, 2238 (2009).
M.M. Reddy, S. Vivekanandhan, M. Misra, S.K. Bhatia, and A.K. Mohanty: Biobased plastics and bionanocomposites: Current status and future opportunities. Prog. Polym. Sci. 38, 1653 (2013).
C.S. Reddy, R. Ghai, and V. Kalia: Polyhydroxyalkanoates: An overview. Bioresour. Technol. 87, 137 (2003).
L. Shang, Q. Fei, Y.H. Zhang, X.Z. Wang, D-D. Fan, and H.N. Chang: Thermal properties and biodegradability studies of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate). J. Polym. Environ. 20, 23 (2011).
E. Zribi-Maaloul, I. Trabelsi, L. Elleuch, H. Chouayekh, and R.B. Salah: Purification and characterization of two polyhydroxyalcanoates from Bacillus cereus. Int. J. Biol. Macromol. 61, 82 (2013).
J.C. Fradinho, J.M.B. Domingos, G. Carvalho, A. Oehmen, and M.A.M. Reis: Polyhydroxyalkanoates production by a mixed photosynthetic consortium of bacteria and algae. Bioresour. Technol. 132, 146 (2013).
J. Eggers and A. Steinbüchel: Poly(3-hydroxybutyrate) degradation in Ralstonia eutropha H16 is mediated stereoselectively to (S)-3-hydroxybutyryl coenzyme A (CoA) via crotonyl-CoA. J. Bacteriol. 195, 3213 (2013).
A.N. Boyandin, V.P. Rudnev, V.N. Ivonin, S.V. Prudnikova, K.I. Korobikhina, M.L. Filipenko, T.G. Volova, and A.J. Sinskey: Biodegradation of polyhydroxyalkanoate films in natural environments. Macromol. Symp. 320, 38 (2012).
W.V. Srubar, S. Pilla, Z.C. Wright, C.A. Ryan, J.P. Greene, C.W. Frank, and S.L. Billington: Mechanisms and impact of fiber–matrix compatibilization techniques on the material characterization of PHBV/oak wood flour engineered biobased composites. Compos. Sci. Technol. 72, 708 (2012).
W.J. Liu, H.L. Yang, Z. Wang, L.S. Dong, and J.J. Liu: Effect of nucleating agents on the crystallization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate). J. Appl. Polym. Sci. 86, 2145 (2002).
M. Avella, G. Bogoeva-Gaceva, A. Buz, M.E. Errico, G. Gentile, and A. Grozdanov: Biocomposites reinforced with kenaf fibers. J. Appl. Polym. Sci. 104, 3192 (2007).
A. El-Hadi, R. Schnabel, E. Straube, G. Müller, and S. Henning: Correlation between degree of crystallinity, morphology, glass temperature, mechanical properties and biodegradation of poly (3-hydroxyalkanoate) PHAs and their blends. Polym. Test. 21, 665 (2002).
P.M. Ajayan: Nanotubes from carbon. Chem. Rev. 99, 1787 (1999).
M.A. Atieh, O.Y. Bakather, B. Al-Tawbini, A.A. Bukhari, F.A. Abuilaiwi, and M.B. Fettouhi: Effect of carboxylic functional group functionalized on carbon nanotubes surface on the removal of lead from water. Bioinorg. Chem. Appl. 2010, 1 (2010).
N.G. Sahoo, S. Rana, J.W. Cho, L. Li, and S.H. Chan: Polymer nanocomposites based on functionalized carbon nanotubes. Prog. Polym. Sci. 35, 837 (2010).
M. Moniruzzaman and K.I. Winey: Polymer nanocomposites containing carbon nanotubes. Macromolecules 39, 5194 (2006).
H. Hu, A. Yu, E. Kim, B. Zhao, M.E. Itkis, E. Bekyarova, and R.C. Haddon: Influence of the zeta potential on the dispersability and purification of single-walled carbon nanotubes. J. Phys. Chem. B 109, 11520 (2005).
S. Vidhate, L. Innocentini-Mei, and N.A.D. Souza: Mechanical and electrical multifunctional poly (3-hydroxybutyrate- co -3-hydroxyvalerate)— multiwall carbon nanotube nanocomposites. Polym. Eng. Sci. 52, 1367 (2012).
C-X. Liu and J-W. Choi: Improved dispersion of carbon nanotubes in polymers at high concentrations. Nanomaterials 2, 329 (2012).
P.C. Ma, J-K. Kim, and B.Z. Tang: Functionalization of carbon nanotubes using a silane coupling agent. Carbon 44, 3232 (2006).
S. Chen, W. Shen, G. Wu, D. Chen, and M. Jiang: A new approach to the functionalization of single-walled carbon nanotubes with both alkyl and carboxyl groups. Chem. Phys. Lett. 402, 312 (2005).
L. Stobinski, B. Lesiak, L. Kövér, J. Tóth, S. Biniak, G. Trykowski, and J. Judek: Multiwall carbon nanotubes purification and oxidation by nitric acid studied by the FTIR and electron spectroscopy methods. J. Alloys Compd. 501, 77 (2010).
B. Scheibe, E. Borowiak-Palen, and R.J. Kalenczuk: Oxidation and reduction of multiwalled carbon nanotubes — preparation and characterization. Mater. Charact. 61, 185 (2010).
L. Liu, Y. Qin, Z. Guo, and D. Zhu: Reduction of solubilized multi-walled carbon nanotubes. Carbon 41, 331 (2003).
C. Damian, M. Andreea, and H. Iovu: Ethylenediamine functionalization effect on the thermo-mechanical properties of epoxy nanocomposites reinforced with multiwall carbon nanotubes. U.P.B. Sci. Bull. 72, 163 (2010).
E.F. Antunes, A.O. Lobo, E.J. Corat, V.J. Trava-Airoldi, A.A. Martin, and C. Veríssimo: Comparative study of first- and second-order Raman spectra of MWCNT at visible and infrared laser excitation. Carbon 44, 2202 (2006).
S. Osswald, M. Havel, and Y. Gogotsi: Monitoring oxidation of multiwalled carbon nanotubes by Raman spectroscopy. J. Raman Spectrosc. 38, 728 (2007).
M.T. Byrne, W.P. McNamee, and Y.K. Gun’ko: Chemical functionalization of carbon nanotubes for the mechanical reinforcement of polystyrene composites. Nanotechnology 19, 1 (2008).
L.M.W.K. Gunaratne, R.A. Shanks, and G. Amarasinghe: Thermal history effects on crystallisation and melting of poly(3-hydroxybutyrate). Thermochim. Acta 423, 127 (2004).
A.J. Owen, J. Heinzel, Ž. Škrbić, and V. Divjaković: Crystallization and melting behaviour of PHB and PHB/HV copolymer. Polymer 33, 1563 (1992).
M. Lai, J. Li, J. Yang, J. Liu, X. Tong, and H. Cheng: The morphology and thermal properties of multi-walled carbon nanotube and poly(hydroxybutyrate-co-hydroxyvalerate) composite. Polym. Int. 53, 1479 (2004).
H-Y. Yu, J-M. Yao, Z-Y. Qin, L. Liu, and X-G. Yang: Comparison of covalent and noncovalent interactions of carbon nanotubes on the crystallization behavior and thermal properties of poly(3-hydroxybutyrate- co -3-hydroxyvalerate). J. Appl. Polym. Sci. 130, 4299 (2013).
M.S.P. Shaffer and A.H. Windle: Fabrication and characterization of carbon nanotube/poly(vinyl alcohol) composites. Adv. Mater. 11, 937 (1999).
Q. Li: Temperature dependence of the electrical properties of the carbon nanotube/polymer composites. eXPRESS Polym. Lett. 3, 769 (2009).
J.O. Aguilar, J.R. Bautista-Quijano, and F. Avilés: Influence of carbon nanotube clustering on the electrical conductivity of polymer composite films. eXPRESS Polym. Lett. 4, 292 (2010).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
do Amaral Montanheiro, T.L., Cristóvan, F.H., Machado, J.P.B. et al. Effect of MWCNT functionalization on thermal and electrical properties of PHBV/MWCNT nanocomposites. Journal of Materials Research 30, 55–65 (2015). https://doi.org/10.1557/jmr.2014.303
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/jmr.2014.303