Hostname: page-component-76fb5796d-vvkck Total loading time: 0 Render date: 2024-04-25T18:13:55.742Z Has data issue: false hasContentIssue false
  • English
  • Français

The origin of the tubular jet

Published online by Cambridge University Press:  26 March 2008

RAYMOND BERGMANN ,
ERIK DE JONG ,
JEAN-BAPTISTE CHOIMET ,
DEVARAJ VAN DER MEER  and
DETLEF LOHSE
RAYMOND BERGMANN
Affiliation:
Physics of Fluids Group, Department of Applied Physics, Impact Institute, and J.M. Burgers Centre for Fluid Dynamics, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands
ERIK DE JONG
Affiliation:
Physics of Fluids Group, Department of Applied Physics, Impact Institute, and J.M. Burgers Centre for Fluid Dynamics, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands
JEAN-BAPTISTE CHOIMET
Affiliation:
Physics of Fluids Group, Department of Applied Physics, Impact Institute, and J.M. Burgers Centre for Fluid Dynamics, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands
DEVARAJ VAN DER MEER
Affiliation:
Physics of Fluids Group, Department of Applied Physics, Impact Institute, and J.M. Burgers Centre for Fluid Dynamics, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands
DETLEF LOHSE
Affiliation:
Physics of Fluids Group, Department of Applied Physics, Impact Institute, and J.M. Burgers Centre for Fluid Dynamics, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands
Get access Rights & Permissions [Opens in a new window]

Abstract

A vertical cylindrical tube is partially immersed in a water-filled container and pressurized to lower the fluid level inside the tube. A sudden release of the pressure in the tube creates a singularity on top of the rising free surface. At the very beginning of the process a jet emerges at the centre of the surface, the strength of which strongly depends on the initial shape of the meniscus. Here, the time-evolution of the complex shape of the free surface and the flow around the cylindrical tube are analysed using high-speed imaging, particle image velocimetry, and numerical simulations. The tubular jet is found to be created by the following series of events, which eventually lead to the flow focusing at the tube's centre. A circular surface wave, produced by the funnelling of flow into the tube, is pushed inwards by the radial flow directly underneath the surface. As the wave moves inward and eventually collapses at the centre of the tube, a bump of fluid grows in the centre due to the converging flow in the bulk. This converging flow continues to feed the jet after the circular wave has collapsed. The singularity of the wave collapse is manifested in the initial sharp tip of the jet. All of the above events are traced back to a single origin: the convergence of the flow as it enters the tube. Movies are available with the online version of the paper.

JFM classification

Wakes/Jets: Jets Waves/Free-surface Flows: Waves/Free-surface Flows
Type
Papers
Information
Journal of Fluid Mechanics , Volume 600 , 10 April 2008 , pp. 19 - 43
Copyright
Copyright © Cambridge University Press 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Antkowiak, A., Bremond, N., Le Dizés, S. & Villermaux, E. 2007 Short-term dynamics of a density interface following an impact. J. Fluid Mech. 577, 241–250.CrossRefGoogle Scholar
Bergmann, R., van der Meer, D., Stijnman, M., Sandtke, M., Prosperetti, A. & Lohse, D. 2006 Giant bubble pinch-off. Phys. Rev. Lett. 96, 154505–154800.CrossRefGoogle ScholarPubMed
Birkhoff, G., MacDougall, D., Pugh, E. & Taylor, G. 1948 Explosives with lined cavities. J. Appl. Phys. 19 (6), 563–582.CrossRefGoogle Scholar
Blake, J. R., Hooton, M. C., Robinson, P. B. & Tong, R. P. 1997 Collapsing cavities, toroidal bubbles and jet impact. Phil. Trans. R. Soc. Lond. A 355, 537–550.CrossRefGoogle Scholar
Bohr, T., Dimon, P. & Putkaradze, V. 1993 Shallow-water approach to the circular hydraulic jumps. J. Fluid Mech. 254, 635–648.CrossRefGoogle Scholar
Boulstone, J. M. & Blake, J. R. 1993 Gas-bubbles bursting at a free-surface. J. Fluid Mech. 254, 437–466.CrossRefGoogle Scholar
Burton, J. C., Waldrep, R. & Taborek, P. 2005 Scaling and instabilities in bubble pinch-off. Phys. Rev. Lett. 94, 184502.CrossRefGoogle ScholarPubMed
Caballero Robledo, G. A., Bergmann, R., van der Meer, D., Prosperetti, A. & Lohse, D. 2007 Role of air in granular jet formation. Phys. Rev. Lett. 99, 018001.CrossRefGoogle Scholar
Chen, A. & Basaran, O. 2002 A new method for significantly reducing drop radius without reducing nozzle radius in drop-on-demand drop production. Phys. Fluids 14, L1.CrossRefGoogle Scholar
Ducleaux, V., Caillé, F., Duez, C., Ybert, C., Bocquet, L. & Clanet, C. 2007 Dynamics of transient cavities, J. Fluid Mech. 591, 1–19.CrossRefGoogle Scholar
Eggers, J., Fontelos, M. A., Leppinen, D. & Snoeijer, J. H. 2007 Theory of the collapsing axisymmetric cavity. Phys. Rev. Lett. 98, 094502.CrossRefGoogle ScholarPubMed
Gaudet, S. 1998 Numerical simulation of circular disks entering the free surface of a fluid. Phys. Fluids 10, 2489.CrossRefGoogle Scholar
Gordillo, J. M. & Pèrez-Saborid, M. 2006 Dynamics of bubble-growth and detachment from a needle. J. Fluid Mech. 562, 303.CrossRefGoogle Scholar
Gordillo, J. M., Sevilla, A., Rodriguez-Rodriguez, J. & Martinez-Bazan, C. 2005 Axisymmetric bubble pinch-off at high Reynolds numbers. Phys. Rev. Lett. 95, 194501.CrossRefGoogle ScholarPubMed
de Jong, J., de Bruin, G., Reinten, H., van den Berg, M., Wijshoff, H., Versluis, M. & Lohse, D. 2006 a Air entrapment in piezo-driven inkjet printheads. J. Acoust. Soc. Am. 120, 1257–1265.CrossRefGoogle Scholar
de Jong, J., Jeurissen, R., Borel, H., van den Berg, M., Versluis, M., Wijshoff, H., Prosperetti, A., Reinten, H. & Lohse, D. 2006 b Entrapped air bubbles in piezo-driven inkjet printing: Their effect on the droplet velocity. Phys. Fluids 18, 121511.CrossRefGoogle Scholar
Landau, L. D. & Lifshitz, E. M. 1987 Fluid Mechanics. Pergamon.Google Scholar
Le, H. 1998 Progress and trends in ink-jet printing technology. J. Imag. Sci. Tech 42, 49–62.CrossRefGoogle Scholar
Leppinen, D. & Lister, J. R. 2003 Capillary pinch-off in inviscid fluids. Phys. Fluids 15, 568.CrossRefGoogle Scholar
Liger-Belair, G., Lemaresquier, H., Robillard, B., Duteurtre, B. & Jeandet, P. 2001 The secrets of fizz in champagne wines: {A} phenomenological study. Am. J. Enol. Viticult. 52, 88–92.CrossRefGoogle Scholar
Lohse, D., Bergmann, R., Mikkelsen, R., Zeilstra, C., van der Meer, D., Versluis, M., van der Weele, K., van der Hoef, M. & Kuipers, H. 2004 Impact on soft sand: {V}oid collapse and jet formation. Phys. Rev. Lett. 93, 198003.CrossRefGoogle Scholar
Longuet-Higgins, M. S., Kerman, B. R. & Lunde, K. 1991 The release of air bubbles from an underwater nozzle. J. Fluid Mech. 230, 365–390.CrossRefGoogle Scholar
Lorenceau, E., Quere, D., Ollitrault, J.-Y. & Clanet, C. 2002 Gravitational oscillations of a liquid column in a tube. Phys. Fluids 14, 1985–1992.CrossRefGoogle Scholar
Middleman, S. 1995 Modeling Axisymmetric Flows. Academic.Google Scholar
Munson, B., Young, D. & Okiishi, T. H. 1998 Fundamentals of Fluid Mechanics. John Wiley & Sons.Google Scholar
Oguz, H. & Prosperetti, A. 1990 Bubble entrainment by the impact of drops on liquid surfaces. J. Fluid Mech. 219, 143–179.CrossRefGoogle Scholar
Oguz, H. & Prosperetti, A. 1993 Dynamics of bubble growth and detachment from a needle. J. Fluid Mech. 257, 111–145.CrossRefGoogle Scholar
Pozrikidis, C. 1997 Introduction to Theoretical and Computational Fluid Dynamics. Oxford University Press.CrossRefGoogle Scholar
Prosperetti, A. 2002 Drop Surface Interactions. Springer.Google Scholar
Royer, J., Corwin, E., Flior, A., Cordero, M.-L., Rivers, M., Eng, P. & Jaeger, H. 2005 Formation of granular jets observed by high-speed x-ray radiography. Nat. Phys. 1, 164–167.CrossRefGoogle Scholar
Saylor, J., Szeri, A. & Foulks, G. 2000 Measurement of surfactant properties using a circular capillary wave field. Exps. Fluids 29, 509–518.CrossRefGoogle Scholar
Suryo, R., Doshi, P. & Basaran, O.A. 2004 Non-self-similar, linear dynamics during pinch-off of a hollow annular jet. Phys. Fluids 16, 4177.CrossRefGoogle Scholar
Thoroddsen, S. & Shen, A. 2001 Granular jets. Phys. Fluids 13, 4–6.CrossRefGoogle Scholar
Worthington, A. 1908 A Study of Splashes. London: Longman and Green.Google Scholar
Zeff, B., Kleber, B., Fineberg, J. & Lathrop, D. 2000 Singularity dynamics in curvature collapse and jet eruption on a fluid surface. Nature 403, 401–404.CrossRefGoogle ScholarPubMed
Zhang, Y. L., Yeo, K. S., Khoo, B. S. & Wang, C. 2001 3D jet impact and toroidal bubbles. J. Comput. Phys. 166, 336–360.CrossRefGoogle Scholar
Zhu, Y., Oguz, H. & Prosperetti, A. 2000 On the mechanism of air entrainment by liquid jets at a free surface. J. Fluid Mech. 404, 151–177.CrossRefGoogle Scholar

Bergmann et al. supplementary material

Movie 1(a-c). A vertical cylindrical tube of inner radius R = 25 mm is partially immersed to a depth H of 200 mm in a water-filled container and pressurized to lower the meniscus level inside the tube. After a sudden release of the pressure the temporal evolution of the free surface is shown for initial meniscus heights of h = 14 mm (a), h = 0 mm (b), and h = -6 mm (c). The dotted white line indicates the position of the bottom of the tube and the solid yellow line is the depth of the centre of the initial meniscus: (a) h > 0 produces no jet, just a small bump of liquid is visible in the centre of the tube; (b) h ≈ 0 produces a sharp jet; (c) h < 0 produces a detached rising water column, from which a strong jet erupts. In all cases the distance L from the bottom of the tube to the bottom of the container is much larger than R.

Download Bergmann et al. supplementary material(Video)
Video 673.9 KB

Bergmann et al. supplementary material

Movie 1(a-c). A vertical cylindrical tube of inner radius R = 25 mm is partially immersed to a depth H of 200 mm in a water-filled container and pressurized to lower the meniscus level inside the tube. After a sudden release of the pressure the temporal evolution of the free surface is shown for initial meniscus heights of h = 14 mm (a), h = 0 mm (b), and h = -6 mm (c). The dotted white line indicates the position of the bottom of the tube and the solid yellow line is the depth of the centre of the initial meniscus: (a) h > 0 produces no jet, just a small bump of liquid is visible in the centre of the tube; (b) h ≈ 0 produces a sharp jet; (c) h < 0 produces a detached rising water column, from which a strong jet erupts. In all cases the distance L from the bottom of the tube to the bottom of the container is much larger than R.

Download Bergmann et al. supplementary material(Video)
Video 629.8 KB

Bergmann et al. supplementary material

Movie 1(a-c). A vertical cylindrical tube of inner radius R = 25 mm is partially immersed to a depth H of 200 mm in a water-filled container and pressurized to lower the meniscus level inside the tube. After a sudden release of the pressure the temporal evolution of the free surface is shown for initial meniscus heights of h = 14 mm (a), h = 0 mm (b), and h = -6 mm (c). The dotted white line indicates the position of the bottom of the tube and the solid yellow line is the depth of the centre of the initial meniscus: (a) h > 0 produces no jet, just a small bump of liquid is visible in the centre of the tube; (b) h ≈ 0 produces a sharp jet; (c) h < 0 produces a detached rising water column, from which a strong jet erupts. In all cases the distance L from the bottom of the tube to the bottom of the container is much larger than R.

Download Bergmann et al. supplementary material(Video)
Video 723.2 KB

Bergmann et al. supplementary material

Movie 1(a-c). A vertical cylindrical tube of inner radius R = 25 mm is partially immersed to a depth H of 200 mm in a water-filled container and pressurized to lower the meniscus level inside the tube. After a sudden release of the pressure the temporal evolution of the free surface is shown for initial meniscus heights of h = 14 mm (a), h = 0 mm (b), and h = -6 mm (c). The dotted white line indicates the position of the bottom of the tube and the solid yellow line is the depth of the centre of the initial meniscus: (a) h > 0 produces no jet, just a small bump of liquid is visible in the centre of the tube; (b) h ≈ 0 produces a sharp jet; (c) h < 0 produces a detached rising water column, from which a strong jet erupts. In all cases the distance L from the bottom of the tube to the bottom of the container is much larger than R.

Download Bergmann et al. supplementary material(Video)
Video 706 KB

Bergmann et al. supplementary material

Movie 1(a-c). A vertical cylindrical tube of inner radius R = 25 mm is partially immersed to a depth H of 200 mm in a water-filled container and pressurized to lower the meniscus level inside the tube. After a sudden release of the pressure the temporal evolution of the free surface is shown for initial meniscus heights of h = 14 mm (a), h = 0 mm (b), and h = -6 mm (c). The dotted white line indicates the position of the bottom of the tube and the solid yellow line is the depth of the centre of the initial meniscus: (a) h > 0 produces no jet, just a small bump of liquid is visible in the centre of the tube; (b) h ≈ 0 produces a sharp jet; (c) h < 0 produces a detached rising water column, from which a strong jet erupts. In all cases the distance L from the bottom of the tube to the bottom of the container is much larger than R.

Download Bergmann et al. supplementary material(Video)
Video 800.2 KB

Bergmann et al. supplementary material

Movie 1(a-c). A vertical cylindrical tube of inner radius R = 25 mm is partially immersed to a depth H of 200 mm in a water-filled container and pressurized to lower the meniscus level inside the tube. After a sudden release of the pressure the temporal evolution of the free surface is shown for initial meniscus heights of h = 14 mm (a), h = 0 mm (b), and h = -6 mm (c). The dotted white line indicates the position of the bottom of the tube and the solid yellow line is the depth of the centre of the initial meniscus: (a) h > 0 produces no jet, just a small bump of liquid is visible in the centre of the tube; (b) h ≈ 0 produces a sharp jet; (c) h < 0 produces a detached rising water column, from which a strong jet erupts. In all cases the distance L from the bottom of the tube to the bottom of the container is much larger than R.

Download Bergmann et al. supplementary material(Video)
Video 797.7 KB

Bergmann et al. supplementary material

Movie 2. The evolution of the free surface after the pressure release seen from below for h = 0 mm (experimental conditions: R = 25 mm, L >> R, H = 300 mm). A circular surface wave is seen to travel inward and its collapse produces the initial the initial sharp tip of the jet.

Download Bergmann et al. supplementary material(Video)
Video 403 KB

Bergmann et al. supplementary material

Movie 2. The evolution of the free surface after the pressure release seen from below for h = 0 mm (experimental conditions: R = 25 mm, L >> R, H = 300 mm). A circular surface wave is seen to travel inward and its collapse produces the initial the initial sharp tip of the jet.

Download Bergmann et al. supplementary material(Video)
Video 355.4 KB

Bergmann et al. supplementary material

Movie 3. The closure of the circular wave viewed from above at an angle for h = 0 mm (experimental conditions: R = 25 mm, L >> R, H = 200 mm). The rim moves as a wall of fluid over the undisturbed inner region of the interface, similar to a hydraulic jump. The jet is initiated when the bottom of the fluid wall reaches the centre.

Download Bergmann et al. supplementary material(Video)
Video 1.2 MB

Bergmann et al. supplementary material

Movie 3. The closure of the circular wave viewed from above at an angle for h = 0 mm (experimental conditions: R = 25 mm, L >> R, H = 200 mm). The rim moves as a wall of fluid over the undisturbed inner region of the interface, similar to a hydraulic jump. The jet is initiated when the bottom of the fluid wall reaches the centre.

Download Bergmann et al. supplementary material(Video)
Video 2.2 MB