Hostname: page-component-7c8c6479df-r7xzm Total loading time: 0 Render date: 2024-03-28T22:30:03.641Z Has data issue: false hasContentIssue false

Evaluation of Bioactive Glass (13-93) Scaffolds with an Oriented Microstructure for Regenerating Load-bearing Bones

Published online by Cambridge University Press:  21 May 2012

Xin Liu
Affiliation:
Department of Materials Science and Engineering and Center for Bone and Tissue Repair and Regeneration, Missouri University of Science and Technology, Rolla, MO 65409, USA.
Mohammed N. Rahaman
Affiliation:
Department of Materials Science and Engineering and Center for Bone and Tissue Repair and Regeneration, Missouri University of Science and Technology, Rolla, MO 65409, USA.
Get access

Abstract

Bioactive glass is an attractive scaffold material for use in filling bone defects because of its widely recognized ability to support the growth of bone cells and to bond firmly with hard and soft tissue. Use of bioactive glasses in the form of porous three-dimensional scaffolds for bone repair applications has been receiving considerable interest in recent years. However, bioactive glass scaffolds have been limited to the repair of low-load bone defects because of their low strength. In the present work, porous and strong bioactive glass scaffolds with an oriented microstructure were prepared by unidirectional freezing of camphene-based suspensions, and evaluated for their ability to regenerate bone in a non-healing rat calvarial defect model. Scaffolds of 13-93 glass (53SiO2, 6Na2O, 12K2O, 5MgO, 20CaO, 4P2O5; wt%) with a porosity of 50% and columnar pores of diameter 50–150 μm showed a compressive strength of 47 ± 5 MPa and an elastic modulus of 11 ± 3 GPa. Total bone regeneration in the oriented scaffolds, 18% after implantation for 12 weeks to 24% after 24 weeks, was not significantly different from that in 13-93 scaffolds with a microstructure similar to that of dry human trabecular bone (control group). The results indicated that these oriented bioactive glass (13-93) scaffolds could potentially be used in the regeneration of loaded bone.

Type
Research Article
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Hutmacher, D.W.. J. Biomater. Sci-Polym. E. 12, 107 (2001).10.1163/156856201744489Google Scholar
[2] Rahaman, M.N., Day, D.E., Bal, B.S., Fu, Q., Jung, S.B., Bonewald LF, L.F., Tomsia, A.P.. Acta Biomater. 7, 2355 (2011).10.1016/j.actbio.2011.03.016Google Scholar
[3] Fu, Q., Rahaman, M.N., Dogan, F., Bal, B.S.. J. Biomed. Mater. Res. B 86, 125 (2008).10.1002/jbm.b.30997Google Scholar
[4] Brink, M., Turunen, T., Happonen, R.P., Yli-Urpo, A.. J. Biomed. Mater. Res. 37, 114 (1997).10.1002/(SICI)1097-4636(199710)37:1<114::AID-JBM14>3.0.CO;2-G3.0.CO;2-G>Google Scholar
[5] Liu, X., Rahaman, M.N., Fu, Q., Tomsia, A.P.. Acta Biomater. 8, 415 (2012).10.1016/j.actbio.2011.07.034Google Scholar
[6] Fu, Q., Rahaman, M.N., Bal, B.S., Brown, R.F., Day, D.E.. Acta Biomater. 4, 1854 (2008).10.1016/j.actbio.2008.04.019Google Scholar
[7] Karageorgiou, V., Kaplan, D.. Biomaterials 26, 5471 (2005).10.1016/j.biomaterials.2005.02.002Google Scholar