Hostname: page-component-7c8c6479df-995ml Total loading time: 0 Render date: 2024-03-27T12:37:56.633Z Has data issue: false hasContentIssue false

Synthesis and thermoelectric properties of Ce(Ru0.67Rh0.33)4Sb12.

Published online by Cambridge University Press:  01 February 2011

Geoff D. Staneff
Affiliation:
Department of Materials Science, California Institute of Technology, Pasadena, CA 91125
Paul D. Asimow
Affiliation:
Division of Geological and Planetary Sciences, California Institute of Technology, Pasadena, CA 91125
Thierry Caillat
Affiliation:
Jet Propulsion Laboratory Pasadena, CA 91109
Get access

Abstract

Exotic filled skutterudite compositions show promise for thermoelectric applications. Current work was undertaken with a nominal composition of Ce(Ru0.67Rh0.33)4Sb12 to experimentally verify its potential as an n-type thermoelectric material. Nominal electroneutrality was expected at 0.89 cerium filling and fully filled materials were expected to be strongly n-type. Filled precursors of the nominal composition were synthesized using straightforward solid state reaction techniques, but standard synthesis routes failed to produce a fully-filled homogenous phase. Instead, the filled thermoelectric Ce(Ru0.67Rh0.33)4Sb12 was synthesized using a combination of solid state reaction of elemental constituents and high pressure hot pressing. A range of pressure-temperature conditions was explored; the upper temperature limit of filled skutterudite in this system decreases with increasing pressure and disappears by 12 GPa. The optimal synthesis was performed in multi-anvil devices at 4–6 GPa pressure and dwell temperatures of 350–700 °C. rutheniumThe result of this work, a Ce(Ru0.67Rh0.33)4Sb12 fully filled skutterudite material, exhibited unexpected p-type conductivity and an electrical resistance of 1.755 mΩ-cm that increased with temperature. Thermal conductivity, Seebeck coefficient, and resistivity were measured on single phase samples. In this paper, we report the details of the synthesis routeand measured thermoelectric properties, speculate on the deviation from expected carrier charge balance, and discuss implications for other filled skutterudite systems.

Type
Research Article
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Nolas, G.S., Slack, G.A., Morelli, D.T., Tritt, T.M., Ehrlich, A.C., “The effect of rare-earth filling on the lattice thermal conductivity of skutterudites,” J. Appl. Phys. 79 (8), (1996)Google Scholar
2. Fornari, M., Singh, D. J., “Prediction of room-temperature high-thermoelectric performance in n-type La(Ru1−xRhx)4Sb12 ,” Appl. Phys. Lett., Vol. 74. No. 24., 36663668 (1999).Google Scholar
3. Takizawa, H., Miura, K., Ito, M., Suzuki, T., Endo, T., “Atom insertion into the CoSb3 skutterudite host lattice under high pressure,” J. Alloy Comp., 282, 7983, (1999).Google Scholar
4. Chen, B., Xu, J.-H., Uher, C., Morelli, D. T., Meisner, G. P., Fleurial, J.-P., Caillat, T., and Borshchevsky, A., Phys. Rev. B 55, 1476 (1997).Google Scholar
5. Staneff, G., “High Cerium Filling Fraction in CoSb3,” 2003 ITS poster session.Google Scholar