A method of generating flat-top waveform in the time-domain based on stimulated Brillouin scattering (SBS) using medium with short phonon lifetime is proposed. In theory, the transmitted pulse is simulated in the case of several media with different phonon lifetime. In experiment, FC-72 and HT-270, which differ significantly in the phonon lifetime, are exploited in the experiment. Both the theoretical and experimental results indicate that, when choosing medium with short phonon lifetime, the top is almost a platform, while there is a peak in the front and a platform thereafter when choosing medium with long phonon lifetime.

An overview on current trends in stimulated Brillouin scattering and optical phase conjugation is given. This report is based on the results of the “Second International Workshop on stimulated Brillouin scattering and phase conjugation” held in Potsdam/Germany in September 2007. The properties of stimulated Brillouin scattering are presented for the compensation of phase distortions in combination with novel laser technology like ceramics materials but also for e.g., phase stabilization, beam combination, and slow light. Photorefractive nonlinear mirrors and resonant refractive index gratings are addressed as phase conjugating mirrors in addition.

The density distribution of inhomogeneous dense deuterium-tritium plasmas in laser fusion is revealed by the energy loss of fast protons going through the plasma. In our simulation of a plasma density diagnostics, the fast protons used for the diagnostics may be generated in the laser-plasma interaction. Dividing a two-dimensional area into grids and knowing the initial and final energies of the protons, we can obtain a large linear and ill-posed equation set for the densities of all grids, which is solved with the Tikhonov regularization method. We find that the accuracy of the set plan with four proton sources is better than those of the set plans with less than four proton sources. Also we have done the density reconstruction especially for four proton sources with and without assuming circularly symmetrical density distribution, and find that the accuracy is better for the reconstruction assuming circular symmetry. The error is about 9% when no noise is added to the final energy for the reconstruction of four proton sources assuming circular symmetry. The accuracies for different random noises to final proton energies with four proton sources are also calculated.

An approach to an alternative laser fusion in a magnetic field with an intense laser of exa watt level will be discussed. Such a strong field in an exa watt laser will induce enhanced nuclear tunneling through the propagation in plasma. This causes an enhanced nuclear reaction for fusion. We discuss the possibilities to apply this to nuclear fusion energy and to obtain break even in a 100 kJ laser.

Electron acceleration by a chirped laser pulse in an azimuthal magnetic field in a plasma has been studied. The betatron resonance saturates and the electrons start losing energy beyond a specific point of time without a frequency chirp. The resonance can be maintained for a longer duration and the energy of the electrons can be enhanced if a suitable frequency chirp is introduced. The duration of interaction increases for a lower plasma density or a lower initial electron energy which causes increase in the electron energy gain. The value of magnetic field required for resonance increases with an increase in plasma density and with a decrease in initial electron energy.

It is shown that the above-threshold electron de Broglie waves, generated by an intense laser pulse at a metal surface are interfering to yield attosecond electron pulses. This interference of the de Broglie waves is an analog on of the superposition of high harmonics generated from rare gas atoms, resulting in trains of attosecond light pulses. Our model is based on the Floquet analysis of the inelastic electron scattering on the oscillating double-layer potential, generated by the incoming laser field of long duration at the metal surface. Owing to the inherent kinematic dispersion, the propagation of attosecond de Broglie waves in vacuum is very different from that of attosecond light pulses, which propagate without changing shape. The clean attosecond structure of the current at the immediate vicinity of the metal surface is largely degraded due to the propagation, but it partially recovers at certain distances from the surface. Accordingly, above the metal surface, there exist “collapse bands,” where the electron current is erratic or noise-like, and there exist “revival layers,” where the electron current consist of ultrashort pulses of about 250 attosecond durations in the parameter range we considered. The maximum value of the current densities of such ultrashort electron pulses has been estimated to be on order of couple of tenth of mA/cm2. The attosecond structure of the electron photocurrent can perhaps be used for monitoring ultrafast relaxation processes in single atoms or in condensed matter.

The Low Temperatures Laboratory of CEA/Grenoble (France) is involved in the development of cryogenic systems for inertial fusion since a ten of years. A conceptual design for the cryogenic infrastructure of the Laser MegaJoule (LMJ) facility has been proposed. Several prototypes have been designed, built and tested like for example the 1500 bars cryo compressor for the targets filling, the target positioner and the thermal shroud remover.

The HIPER project will necessitate the development of such equipments. The main difference is that this time, the cryogenic targets are direct drive targets. The first phase of HIPER experiments is a single shot period. Based on the experience gained the last years, not only by our laboratory but also by Omega and G.A teams, we could design the new HIPER equipments for this phase.

Some experimental results obtained with the prototypes of the LMJ cryogenic system are given and a first conceptual design for the HIPER single shot cryogenic system is shown.

Quasi-monoenergetic electron beams of energies 12 MeV to over 200 MeV are generated from both nitrogen and helium gas targets with 7TW laser pulses. Typically nitrogen gas interactions lead to electron bunches in the range of 12 to 50 MeV varying from shot to shot. Helium gas leads to higher energy electron bunches from 25 to 100 MeV. Occasionally exceptionally high energy bunches of electrons up to 200 MeV are observed from nitrogen and helium. Initial full two-dimensional simulations indicate the production of 20–30 MeV electron energy bunches for the typical interaction conditions as the electrons are injected from wave breaking in the plasma wake behind the laser pulse and injected into the strong electric field gradient propagating with the optical pulse. This is consistent with the experimental observations from the majority of shots. Pulse compression during propagation in the high density plasma does not allow the threshold conditions for the full bubble regime to be reached. However, the electric acceleration field in the wakefield cavity is still sufficient to lead to the formation of a bunch of electrons with an energy peak in the range of 20 to 30 MeV. In order to explain the occasional high energy shots most likely a lower density channel created by the laser prepulse may occasionally form a natural low density electron guide channel giving ideal conditions for acceleration over much longer lengths leading to the high energies observed.

In this work is accomplished the determination of the corona, local and non-local thermodynamic equilibrium regimes for optically thin carbon plasmas in steady state, in terms of the plasma density and temperature using the ABAKO code. The determination is made through the analysis of the plasma average ionization and ion and level populations. The results are compared whit those obtained applying Griem's criterion. Finally, it is made a brief analysis of the effects of the calculation of level populations assuming different plasma regimes in radiative properties, such as emissivities and opacities.

We focus attention on the combinations of swiftly growing electromagnetic instabilities (EMI) arising in the interaction of relativistic electron beams (REB) with precompressed deuterium-tritium (DT) fuels of fast ignition interest for inertial confinement fusion (ICF). REB-target system is taken neutral in charge and current with distribution functions including target and beam temperatures. We stress also the significant impact on modes growth rates (GR) of mode-mode coupling and intrabeam scattering. Collisional damping is documented at large wave numbers in terms of inverse skin depth. A quasi-linear approach yields lower GR than linear ones. One of the most conspicuous output of the linear analysis are three-dimensional (3D) broken ridges featuring the largest GR above k-space for an oblique propagation w.r.t initial particle beam direction. The given modes are seen immune to any temperature induced damping. Those novel patterns are easily produced by considering simultaneously Weibel, filamentation and two-stream instabilities. The behaviors persist in the presence of smooth density gradients or strong applied magnetic fields. Moreover, in the very early propagation stage with no current neutralization in the presence of large edge density gradients, REB demonstrate a characteristics ringlike and regularly spiked pattern in agreement with recent experimental results and previous simulations.

With the rapid development of high power microwave (HPM) technologies, HPM devices with several output frequencies are becoming more and more attractive. Diplexer is a microwave device with two output frequencies, here, an L/X band diplexer with novel structure is tried to be employed in the HPM system. In order to obtain the same radiation direction for the L and X band microwaves in the diplexer, the reflection of L band microwaves and transmission of X band microwaves are realized by an array of irises. To obtain the required performance, the width and thickness of the irises and the distance between them should be well chosen. The diplexer is investigated through theoretical analysis and numerical computation, and the final design described in this work, is the result of an overall optimization process. In simulation, both the reflectivities of L-band microwaves and the transmissivities of X band microwaves reach 99.5%, and the power handling capacity of the diplexer is higher than 5.6 gigawatt (GW). Then, the L/X band diplexer is designed and fabricated according to the optimized results. After that, a series of experiments are carried out to test the diplexer. The cold test results show that the reflectivities of L band microwaves are as high as 97.5%, and the transmissivities of X band microwaves are up to 98.8%, and the acquired radiation patterns show that the designed diplexer is suitable for the diplexing of L/X band microwaves, in a word, the cold test results of the diplexer are in good agreement with the simulational results. In the end, the diplexer is tested with GW class HPMs. The radiated HPMs have little change in the pulse duration and magnitude with the diplexer applied, that is to say, there is no microwave breakdown during the HPM reflection and transmission.

We describe a direct model for simulation of relativistic electrons acceleration with a given electromagnetic field which is determined by wave packet parameters. The multimode time-spatial structure of a focused Nd-laser beam with stochastic phase disturbances of each spectral component is taken into account as a source of random forces. Electron energies of more than 10 MeV are obtained even at moderate flux densities of 1016 W/cm2. The developed numerical code makes it possible to obtain a quantitative energy distribution function in relation to both field intensity and the temporal bell-shape of the laser pulse. The efficient heating of electrons can be triggered in the presence of a counter propagating wave being reflected from the critical plasma area with a different reflection coefficient. The heating mechanism occurs with a delay relative to the beginning of the pulse when the laser fields exceed some threshold amplitudes. The qualitative comparison of simulation results with the experimental data is given as evidence that this mechanism is reasonable.

New results obtained in experiments on laser irradiation (I = 5 × 1013 W/cm2, λ = 1.054 µm) of low-density (2–10 mg/cm3) porous materials (agar, triacetate cellulose, and foam polysterene) are presented and discussed from the standpoint of optimum porous material utilization in target designs for inertial confinement fusion. The influence of low-density material microstructure of irradiated samples on the absorption of laser radiation and the energy transfer processes was investigated using X-ray and optical diagnostic methods with high temporal and spatial resolution.

The test on an X-pinch device powered by a pulsed power generator (PPG-I) was carried out step by step. In the first step, a brass rod of 6 mm in diameter was used as a load to replace the X-pinch load. The results of the first step shows that all the current, about 200 kA in amplitude, output from PPG-I flows through the load and no breakdown or flashover in vacuum of the load section happens. The waveform of the current from PPG-I measured with a wall resistor coincides exactly with that of the load current measured with a Rogowski coil, which indicates that the calibrations of the wall resistor and Rogowski coil are correct. In the second step, an X-pinch load made of two molybdenum wires of 40 µm in diameter was used. It was found that the distance between the cathode and anode affects considerably the operation of the device. While breakdown in vacuum happens for the distance equal to 30 mm, it works very well for the distance equal to 16 mm. The reason for this phenomenon was given.

Self-focusing effects, induced by ASTERIX pulsed laser at PALS Laboratory of Prague, have been investigated. Laser was employed at the third harmonics (438 nm) and intensities of the order of 1016 W/cm2. Pure Au was used as thin target and irradiated with 30° incidence angle. An ion energy analyzer was employed to detect the energy-to-mass ratio of emitted ions from plasma. Measurements were performed by changing the focal point position with a high spatial resolution step-motor. Results demonstrated that non linear processes, due to self-focusing effects, occurs when the laser beam is focused at about 200 µm in front of the target surface. In such conditions, a new ion group, having high charge state and kinetic energy, is produced because of the increment in temperature of the laser-generated plasma.

Two basic ways to amplification of spontaneous emission in the soft X-ray region are described. The first is based on the electron-collisional recombination pumping scheme, which uses recombination of fully stripped ions into hydrogen-like ions to create (in the case of sufficiently fast cooling) a population inversion on energy levels belonging to the Balmer-alpha transition. We test this scheme on nitrogen, for which the lasing wavelength is 13.4 nm. The second way to amplification of spontaneous emission is based on the electron-collisional excitation pumping scheme: this uses for creation of population inversion a fast excitation of Ne- or Ni-like ions. However, for wavelength below 15 nm it is necessary to use Ni-like ions of some metal vapors. Feeding metal vapors into a capillary is difficult, and if being fed they deposit on the capillary wall and significantly reduce the capillary lifetime. That is why we prepare metal vapor plasma in a capillary with liquid wall – by wire explosion in water. For slowdown of the plasma-channel expansion a local-water-compression by linearly focused shock wave is being developed.