The Alpine tectonics in the Pyrenean Range is controlled by motions of basement blocks (High Primary Range, North Pyrenean blocks). These blocks belong to different tectonic units; they are amygdaloid, wedge-shaped, squeezed at their roots, upthrust and displaced with their cover (detached or not) in a convergent shear zone between the European and Iberian plates. These basement blocks are distributed within isopic (isofacial) units with diachronous terrigenous prisms. The stratigraphical analysis of their Mesozoīc cover reveals their relative position during the Mid-Cretaceous continental break-up which induced the separation of the two previously joined plates.

From the Triassic to the Late Eocene, the Iberian Peninsula underwent three successive rotations with respect to the stable European plate, (a) Prior to the Late Aptian, a nearly 150 km southwestward motion resulted in stretching and thinning of the continental crust beneath the North Pyrenean zone, the Aquitaine Basin and the Bay of Biscay continental margins (rifting). Distensive structures trended 90° N to 130° N, and were shifted by 30° N to 50° N transform faults. (b) During the Late Aptian to Santonian interval, an approximately 400 km southeastward motion resulted in the opening of the Bay of Biscay and sinistral slipping of Iberia along the North Pyrenean transform zone (drifting), (c) During palaeocene–Eocene time, a 150 km northwestward convergent motion resulted in limited subduction of the oceanic crust of the Bay of Biscay beneath the Iberian plate, and folding of the Pyrenean chain. The folded belt resulted from squeezing of the former European and Iberian margins (rifted or transform margins, depending on the segment considered).

During the Palaeogene Alpine compression three units were differentiated in the studied area (south of the Ebro Basin): the Catalan Coastal Range, dominated by NE–SW major basement faults with a sinistral movement; The Iberian Range, where the important basement faults have a NW–SE direction and a reverse movement (often with a dextral component); the Linking Zone, between these two ranges, where an E–W dominant structural direction is marked by an array of folds and thrusts (with a northward vergence) in the Mesozoic cover.

From the analysis of both these major structures and the small-scale structures, it can be deduced that the compression in the studied area has evolved from a NW–SE direction (lower-middle Eocene) to a N–S direction and to a NE–SW one (uppermost Oligocene). The major structures are due to the N–S compression. Later, the stress-field progressively changed to a distensive regime.

We suggest a relation between the compressive phases and the displacement direction of the Iberian Plate with reference to the European Plate.

The subsidence history of the Aquitaine basin has been determined from deep exploratory well data. The contribution of sediment loading to the subsidence has been evaluated and removed, including corrections for effects of compaction, water depth and changes of sea-level but not of flexural rigidity of the lithosphere. The tectonic subsidence curves obtained indicate that the basin underwent two periods of subsidence acceleration in the Trias–Early Lias and Late Jurassic–Early Cretaceous. They are interpreted in relation to the displacements of Iberia with respect to Europe as two periods of extension followed by periods of passive subsidence due to conductive cooling of the lithosphere; the formation of the ‘flysch trough’ in the southern part of the basin is then discussed.

A major ductile shear zone in the gneissic core of the Saint-Barthélemy Massif, central Pyrenees, is characterized by an asymmetric shear strain profile defined as mylonite-dominated footwall geometry. The shear zone is part of a low angle fault system in the massif which caused thinning of a sequence of lithologic units and isograds. The shear zone is interpreted as a low angle normal fault zone of probably Cretaceous age, predating Alpine crustal shortening in the central Pyrenees.

From 70 km northeast of Milford Sound (44.14° S, 168.55° E) to the coast at Milford Sound (44.53° S, 167.83° E) the trace of the Alpine Fault is nowhere more than 1.2 km from the arc with a centre at 48.81° S, 173.20° E and a radius of 628 km (5.65° latitude). Earthquake epicentres indicate that the arc defines the position of the fault just off Fiordland's outer coast and then to near the north end of Puysegur Trench at 46.9° S, 165.25° E. Along the fault vertically to a depth of 10 km the Fiordland rocks are 0.6 Mg/m3 denser than those to the northwest. Displaced post-glacial topography at and near Milford Sound shows that the dip of the fault is southeast at 75 ± 5° and that the faulting is pure dextral at a rate of at least 46 ± 5 mm/yr.

Three theories have been proposed for the origin of Carboniferous basins in Britain: megashear; tension from Rheic Ocean subduction; tension from rifting of the North Atlantic. The first two hypotheses are rejected because they do not explain the Carboniferous volcanism, Stephanian dyke swarm, Boreal marine transgressions during the late Carboniferous and Permian, Carboniferous sedimentary basin histories, basin types or basin orientations.

Carboniferous volcanics were rift-related due to crustal thinning, which also resulted in the formation of sedimentary basins in the British Isles and a marine transgression of Tethyan faunas. Newly formed Carboniferous fracture lines and basin orientations showed that tension varied between east–west and northwest–southeast. Crustal fracturing in the latest Dinantian, possibly due to collision of microcontinents in the closing Rheic and Phoibic oceans with North America, led to the synchronous initiation of rift basins in East Greenland, elevation of source areas for the Millstone Grit of the British Isles, and formation of transform fault zones near Svalbard and North Spain. The narrow, rapidly subsiding, quickly changing ‘fosse’ basins which formed in these transcurrent fault zones contrast with the coeval stable, slower subsiding rift-parallel ‘saucer’ basins of the British Isles. Variations of subsidence rates in all these basins allow interpretations of crustal stress history. Brittle fracturing in the Westphalian C formed the first oceanic crust, but free oceanic spreading from Spain to southwest of the Faeroes only occurred after Stephanian dyke intrusion and crustal thinning at the Faeroes. The Norwegian Sea underwent continental crustal thinning. Ocean spreading and crustal thinning ceased in latest Stephanian times.

Boreal marine transgressions advanced down the newly thinned Norwegian Sea, firstly along its northern part and then reaching the North Sea basins and Germany in the Rotliegendes and Zechstein. Synsedimetary ore deposits formed during early tensional fracturing of the crust; thick coal sequences formed in rift-parallel basins during clastic source decay of elevated rift margins; oil source rocks formed along narrow oceanic or continental rifts from the Westphalian C onwards.

Relic pillows in the middle Proterozoic amphibolites, occurring in the Sirohi Road–Abu Road tract of Rajasthan, India exhibit contrasted mineral assemblages from core to rim – mimetic after the crystalline core, the zone of incipient crystallization, and the rim of the original pillows. The major element distribution pattern across the pillows indicates exchange of Na–Al for Ca (Mg, Fe) in an inner reaction zone, surrounding the core and in the inner margin of the rim, and Fe–Al exchange for Ca–Si at the outer margin of the rim.

Despite such exchanges around the rims, these pillows have retained their initial geochemical characteristics internally and thus have largely acted as closed systems during post-emplacement metamorphism. Mineral parageneses indicate that the contrasted mineral assemblages could evolve from domainal characters of the co-existing fluids, the compositions of which were only buffered by the reacting minerals during regional metamorphism.

The major, minor and trace element contents of the pillows and of amphibolites of diverse petrographic character in the region further establish that the pillow interiors and the massive amphibolites were least modified during metamorphism(s), and represent oceanic tholeiites. Their average 2300 ppm K, 4.5 ppm Rb, 150 ppm Sr, along with the K/Rb and K/Sr ratios of 510 and 15 respectively resemble that of the low K-tholeiites, occurring nearest to the trenches in modern island arcs. On the other hand, the higher values of 17300 ppm K, 4.9 ppm Rb, and 210 ppm Sr of the banded and the schistose amphibolites indicate that they were contaminated in various magnitudes by oceanic sediments.

Two Carboniferous trilobites, Ditomopyge convexa sp.nov. and Paladin (Paladin) sp.ind., are described from the Nordenskiöldbreen Formation in Spitsbergen. The new material is of considerable interest as it extends the known distribution of Carboniferous trilobites and provides further information on palaeobiogeography.

Select area electron diffraction and microanalysis of the optically dark component of a ferromanganese nodule from the South East Indian Ocean Manganese Field indicate that this is composed of a random stratification of crystallites of vernadite MnO2. (R2O, RO, R2O3)x. yH2O, where R represents elements such as K, Ba, Na, Ca, Mg, and a disordered hydrated iron oxide, possibly ferrihydrite 5Fe2, O3. 9H2O or feroxyhyte δ′-FeOOH. Whether the dark component is an irregular mixed-layer hybrid mineral or a layered accumulation resulting from epitaxy of the above phases is uncertain.

Fifty-three samples from the Oxford, Kimmeridge and Speeton Clays of the Yorkshire area have been analysed petrographically and geochemically, by X-ray diffraction, X-ray fluorescence, atomic absorption and combustion (TOC). Major elements and the following trace elements have been determined: Rb, Sr, Ba, Cr, V, Co, Ni, Cu, Zn and Mo. P2O5, Rb, Ba, Cr and V show positive correlation to the clastic fraction (quartz, feldspar and clay minerals). CaO, MnO, and Sr and to a lesser extent Ni, Cu and Zn seem to be positively correlated to calcite, while Fe2O5, MnO, MgO and Co are linked to siderite. Stratigraphical variations of element/element ratios have been used to obtain sedimentological information from the petrographical and geochemical data.

The Oxford Clay, with its coarse and immature clays, was deposited in a regressive development. An upwards shallowing with ventilated deposition of more mature and altered clastic material took place throughout the unit. During deposition of the Kimmeridge Clay more reducing conditions existed and finer grained, smectite-rich sediments were formed. The fine grained Speeton Clay was deposited during changing depositional conditions, varying ventilation in a generally regressive development. Several sedimentological breaks characterize the unit.

The stratigraphy of the ?Ordovician South Connemara Group is described. The group is approximately 3 km thick and includes sedimentary and volcanic rocks. The sedimentary elements of the succession include conglomerates, sandstones, shales, cherts and minor limestone breccias. The Lettermullen Formation exhibits the thickest continuous sedimentary sequence in the group. It is divided into five facies: a conglomerate facies, thick sandstone facies, medium sandstone facies, sandstone/siltstone facies, and chert facies. The sedimentary features of these rocks include channelling and grading and are described in terms of Bouma units where applicable. The coarse elements of the formation are thought to represent deposition in, or proximal to, submarine channels feeding a more distal depositional site represented by the finer elements. Igneous rocks of the group include pillowed and non-pillowed lavas, massive amphibolites and minor tuffs often in conformable contact with the sediments. Petrography of conglomerate clasts and sandstones indicates derivation from a continental source area. Palaeocurrent analysis reveals a primary easterly mode with a subsidiary northerly mode. It is suggested that the group exhibits some characteristics of trench-fill sequences and the succession may be related to similar environments within the Southern Uplands accretionary wedge.