Hostname: page-component-7c8c6479df-fqc5m Total loading time: 0 Render date: 2024-03-29T13:18:27.655Z Has data issue: false hasContentIssue false

Densification and Sintering of a Microwave-Plasma-Synthesized Iron Nanopowder

Published online by Cambridge University Press:  11 February 2011

L. J. Kecskes
Affiliation:
U.S. Army Research Laboratory, Weapons and Materials Research Directorate, Aberdeen Proving Ground, MD 21005–5069, USA
R. H. Woodman
Affiliation:
U.S. Army Research Laboratory, Weapons and Materials Research Directorate, Aberdeen Proving Ground, MD 21005–5069, USA
B. R. Klotz
Affiliation:
U.S. Army Research Laboratory, Weapons and Materials Research Directorate, Aberdeen Proving Ground, MD 21005–5069, USA
Get access

Abstract

Powder compacts made from microwave-plasma-synthesized iron (Fe) nanopowder (Materials Modification Inc., Fairfax, VA) were sintered under hydrogen (H2). Results showed that without the application of pressure, the powder could not be sintered to full density. In subsequent experiments, the powder was consolidated to final densities near 80% of the theoretical full density, using plasma pressure compaction (P2C). To provide an explanation for the difficulty in attaining full densification, the precursor powder and compacted pellet characteristics were examined by several methods. These included residual porosity by mercury pycnometry, surface area measurement by Brunauer, Emmett, and Teller (BET) analysis, and structural change by x-ray diffraction (XRD) and scanning electron microscopy (SEM). It was observed that the nanosized primary particles were aggregated into micrometer-sized dendritic structures, with the appearance of tumbleweeds. The observed limitations in the densification and associated porous microstructures of the pressureless-sintered and P2C-densified compacts were rationalized in terms of the behavior of the dendritic aggregate structures rather than that of the nanosized primary particles.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. He, L., Allard, L.F., Breder, K., and Ma, E., “Nanophase Fe Alloys Consolidated to Full Density from Mechanically Milled Powders,” J. Mater. Res. 15 [4], 904912 (2000).Google Scholar
2. Kalyanaraman, R., Yoo, S., Krupashnkara, M.S., Sudarshan, T.S., and Dowding, R.J., “Synthesis and Consolidation of Iron Nanopowders,” Nanostructured Materials 10 [8], 13791392 (1998).Google Scholar
3. Groza, J.R., “Filed-Activated Sintering,” ASM Handbook; Powder Metallurgy, Vol. 7, ASM, Materials Park, OH, 583589 (1998).Google Scholar
4. Jones, G., Groza, J.R., Yamazaki, K., and Shoda, K., “Plasma Activated Sintering (PAS) of Tungsten Powders,” Mater. Manuf. Proc. 9 [6], 11051114 (1994).Google Scholar
5. Cullity, B.D., Elements of X-Ray Diffraction, Addison Wesley, Reading, MA, 284 (1978).Google Scholar
6. Askeland, D.R., The Science and Engineering of Materials, PWS-Kent Publishing Company, Boston, MA, 123 (1989).Google Scholar
7. Groza, J.R., and Dowding, R.J., “Nanoparticulate Materials Densification,” Nanostr. Mater. 7 [7], 749768 (1996).Google Scholar
8. Goetzel, C.G., Treatise on Powder Metallurgy, Vol. 1, Interscience Publishers, Inc., New York, NY, 515 (1949).Google Scholar