Hostname: page-component-8448b6f56d-c4f8m Total loading time: 0 Render date: 2024-04-24T04:55:31.324Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and Characterization of Photopatternable BaTiO3 /Polymer Composites

Published online by Cambridge University Press:  01 February 2011

Roman Popielarz ,
C.K. Chiang ,
Ryusuke Nozaki  and
Jan Obrzut
Roman Popielarz
Affiliation:
National Institute of Standards and Technology, Polymers Division, 100 Bureau Drive, Gaithersburg, MD 20899, U.S.A.
C.K. Chiang
Affiliation:
National Institute of Standards and Technology, Polymers Division, 100 Bureau Drive, Gaithersburg, MD 20899, U.S.A.
Ryusuke Nozaki
Affiliation:
National Institute of Standards and Technology, Polymers Division, 100 Bureau Drive, Gaithersburg, MD 20899, U.S.A.
Jan Obrzut
Affiliation:
National Institute of Standards and Technology, Polymers Division, 100 Bureau Drive, Gaithersburg, MD 20899, U.S.A.
Get access

Abstract

The dielectric properties of acrylic resin composites filled with BaTiO3, have been evaluated over a broad frequency range. These materials were used as models to study the dielectric response in polymer composite films for de-coupling capacitance applications. A series of photocurable resin formulations were prepared and photocured into films of approximately 100 μm to 120 μm thick. Dielectric permittivity of the materials was investigated at frequencies from 100 Hz to 10 GHz and temperatures from –140 °C to +150 °C. The dielectric constant of the composites reached 35 at 1 GHz. A high frequency dielectric relaxation process was identified and related to the molecular structure of the polymer matrix.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 628: Symposium CC – Hybrid Organic/Inorganic Materials , 2000 , CC11.5
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Swartz, S.L.. IEEE Trans. Electr. Insul., EI-25, 935–87 (1990).Google Scholar
2. Chahal, P., Tummala, R.R., Allen, M.G., Swaminathan, M.. IEEE Trans. Comp. Pack. Manuf. Tech., Part B: Advaned Packaging,, 21, 184–193 (1998).Google Scholar
3. ASTM D150, “Permittivity (dielectric constant) an loss tangent (dissipation factor) of insulating materials”, Rev. 5, (1986)Google Scholar
4. Obrzut, J. and Nozaki, R., Proceedings of the IPC EXPO Technical Conference, April 2-8, 2000, San Diego, CA,Google Scholar
5. Wakino, K., Okada, T., Yoshida, N., Tomono, K.. J. Am. Ceram. Soc.,, 76, 2588–94 (1993).Google Scholar
6. Jayasundere, N., Smith, B.V., J. Appl. Phys.,, 73, 2462–66 (1993).Google Scholar
7. Kinoshita, K. and Yamaji, A.. J. Appl. Phys., 47, 371–373 (1976).Google Scholar
8. Certain materials and equipment identified in this manuscript are solely for specifying the experimental procedures and do not imply endorsement by NIST or that they are necessarily the best for these purposes.Google Scholar