Hostname: page-component-7c8c6479df-xxrs7 Total loading time: 0 Render date: 2024-03-28T09:28:50.714Z Has data issue: false hasContentIssue false

Turbulent shear-layer mixing at high Reynolds numbers: effects of inflow conditions

Published online by Cambridge University Press:  10 December 1998

M. D. SLESSOR
Affiliation:
Graduate Aeronautical Laboratories, California Institute of Technology, Pasadena, CA 91125, USA
C. L. BOND
Affiliation:
Graduate Aeronautical Laboratories, California Institute of Technology, Pasadena, CA 91125, USA
P. E. DIMOTAKIS
Affiliation:
Graduate Aeronautical Laboratories, California Institute of Technology, Pasadena, CA 91125, USA

Abstract

We report on the results from a set of incompressible, shear-layer flow experiments, at high Reynolds number (Reδ≡ρΔUδT(x)/ μ≃2×105), in which the inflow conditions of shear-layer formation were varied (δT is the temperature-rise thickness for chemically-reacting shear layers). Both inert and chemically-reacting flows were investigated, the latter employing the (H2+NO)/F2 chemical system in the kinetically-fast regime to measure molecular mixing. Inflow conditions were varied by perturbing each, or both, boundary layers on the splitter plate separating the two freestream flows, upstream of shear-layer formation. The results of the chemically-reacting ‘flip experiments’ reveal that seemingly small changes in inflow conditions can have a significant influence not only on the large-scale structure and shear-layer growth rate, as had been documented previously, but also on molecular mixing and chemical-product formation, far downstream of the inflow region.

Type
Research Article
Copyright
© 1998 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)