Hostname: page-component-7c8c6479df-ph5wq Total loading time: 0 Render date: 2024-03-27T05:26:49.880Z Has data issue: false hasContentIssue false

Metalized carbon nanotubes as a conductive material for energy storage devices

Published online by Cambridge University Press:  15 July 2016

Feryan Ahmed*
Affiliation:
Glauconix, Inc., Albany, NY 12203; and Colleges of Nanoscale Science + Engineering SUNY Polytechnic Institute, Albany, NY 12203
Eric Eisenbraun
Affiliation:
Colleges of Nanoscale Science + Engineering SUNY Polytechnic Institute, Albany, NY 12203
Sarah Ashmeg
Affiliation:
Colleges of Nanoscale Science + Engineering SUNY Polytechnic Institute, Albany, NY 12203
*
a) Address all correspondence to this author. e-mail: fahmed@sunycnse.com
Get access

Abstract

Herein is described the preparation and characterization of conductive materials for application in energy storage devices, such as fuel cells. The synthetic approach uses commercially available materials and simple experimental procedures to decorate multi-walled carbon nanotubes (MWCNTs) with plain and thiolated gold nanoparticles (Au NPs). The compositional characterization data (x-ray photoelectron spectroscopy) and the electrical conductivity data (cyclic voltammetry (CV) and oxygen reduction reaction (ORR)) for the MWCNT-Au NP composites, both pre- and post-anneal, is reported.

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Gao, Y., Munroe, N., Kong, X., and Jones, K.: Assessing the catalyst processing for low temperature cofired ceramic-based direct methanol fuel cells. J. Power Sources 189, 935 (2009).Google Scholar
Jiang, B., Maeder, T., Santis-Alvarez, A.J., Poulikakos, D., and Muralt, P.: A low-temperature co-fired ceramic micro-reactor system for high-efficiency on-site hydrogen production. J. Power Sources 273, 1202 (2015).Google Scholar
Shin, Y., Kim, O., Hong, J-C., Oh, J-H., Kim, W-J., Haam, S., and Chung, C-H.: The development of micro-fuel processor using low temperature co-fired ceramic (LTCC). Int. J. Hydrogen Energy 31, 1925 (2006).Google Scholar
Zhang, R.Y. and Olin, H.: Gold-carbon nanotube nanocomposites: Synthesis and applications. Int. J. Biomed. Nanosci. Nanotechnol. 2, 112 (2011).CrossRefGoogle Scholar
Premkumar, T. and Geckeler, K.E.: Gold nanoparticles and carbon nanotubes: Precursors for novel composite materials. In Advanced Nanomaterials, Geckeler, K.E. and Nishide, H. eds.; John Wiley & Sons, Inc., New York, 2009; p. 249.Google Scholar
Andrieux-Ledier, A., Tremblay, B., and Courty, A.: Stability of self-ordered thiol-coated silver nanoparticles: Oxidative environment effects. Langmuir 29, 13140 (2013).Google Scholar
Shi, Y., Yang, R., and Yuet, P.K.: Easy decoration of carbon nanotubes with well dispersed gold nanoparticles and the use of the material as an electrocatalyst. Carbon 47, 1146 (2009).Google Scholar
Hou, X., Wang, L., Wang, X., and Li, Z.: Coating multiwalled carbon nanotubes with gold nanoparticles derived from gold salt precursors. Diamond Relat. Mater. 20, 1329 (2011).CrossRefGoogle Scholar
Thermo Scientific XPS: Available at: http://xpssimplified.com/elements/sulfur.php (accessed January 11, 2015).Google Scholar