Journal of Fluid Mechanics


Thermal effects on the wake of a heated circular cylinder operating in mixed convection regime

H. Hua1 c1 and M. M. Koochesfahania2

a1 Department of Aerospace Engineering, Iowa State University, Ames, IA 50011, USA

a2 Department of Mechanical Engineering, Michigan State University, East Lansing, MI 48824, USA


The thermal effects on the wake flow behind a heated circular cylinder operating in the mixed convection regime were investigated experimentally in the present study. The experiments were conducted in a vertical water channel with the heated cylinder placed horizontally and the flow approaching the cylinder downwards. With such a flow arrangement, the direction of the thermally induced buoyancy force acting on the fluid surrounding the heated cylinder would be opposite to the approach flow. During the experiments, the temperature and Reynolds number of the approach flow were held constant. By adjusting the surface temperature of the heated cylinder, the corresponding Richardson number ($\mathit{Ri}= \mathit{Gr}/ {\mathit{Re}}^{2} $) was varied between 0.0 (unheated) and 1.04, resulting in a change in the heat transfer process from forced convection to mixed convection. A novel flow diagnostic technique, molecular tagging velocimetry and thermometry (MTV&T), was used for qualitative flow visualization of thermally induced flow structures and quantitative, simultaneous measurements of flow velocity and temperature distributions in the wake of the heated cylinder. With increasing temperature of the heated cylinder (i.e. Richardson number), significant modifications of the wake flow pattern and wake vortex shedding process were clearly revealed. When the Richardson number was relatively small ($\mathit{Ri}\leq 0. 31$), the vortex shedding process in the wake of the heated cylinder was found to be quite similar to that of an unheated cylinder. As the Richardson number increased to ${\ensuremath{\sim} }0. 50$, the wake vortex shedding process was found to be ‘delayed’, with the wake vortex structures beginning to shed much further downstream. As the Richardson number approached unity ($\mathit{Ri}\geq 0. 72$), instead of having ‘Kármán’ vortices shedding alternately at the two sides of the heated cylinder, concurrent shedding of smaller vortex structures was observed in the near wake of the heated cylinder. The smaller vortex structures were found to behave more like ‘Kelvin–Helmholtz’ vortices than ‘Kármán’ vortices, and adjacent small vortices would merge to form larger vortex structures further downstream. It was also found that the shedding frequency of the wake vortex structures decreased with increasing Richardson number. The wake closure length and the drag coefficient of the heated cylinder were found initially to decrease slightly when the Richardson number was relatively small ($\mathit{Ri}\lt 0. 31$), and then to increase monotonically with increasing Richardson number as the Richardson number became relatively large ($\mathit{Ri}\gt 0. 31$). The average Nusselt number ($ \overline{\mathit{Nu}} $) of the heated cylinder was found to decrease almost linearly with increasing Richardson number.

(Received September 10 2010)

(Reviewed May 16 2011)

(Accepted July 15 2011)

(Online publication October 06 2011)

Key Words:

  • buoyancy-driven instability;
  • buoyant boundary layers;
  • wakes


c1 Email address for correspondence: