Hostname: page-component-848d4c4894-nr4z6 Total loading time: 0 Render date: 2024-05-21T07:56:00.922Z Has data issue: false hasContentIssue false
  • English
  • Français

Quantitative Measurement of Boron and Phosphorus in Solar Grade Silicon Feedstocks by High Resolution Fast-Flow Glow-Discharge Mass Spectrometry

Published online by Cambridge University Press:  21 March 2011

Karol Putyera ,
Kenghsien Su ,
Changhsiu Liu ,
R. S. Hockett  and
Larry Wang
Karol Putyera
Affiliation:
Evans Analytical Group - New York, 6707 Brooklawn Parkway, Syracuse, NY 13211, U.S.A
Kenghsien Su
Affiliation:
Evans Analytical Group - New York, 6707 Brooklawn Parkway, Syracuse, NY 13211, U.S.A
Changhsiu Liu
Affiliation:
Evans Analytical Group - New York, 6707 Brooklawn Parkway, Syracuse, NY 13211, U.S.A
R. S. Hockett
Affiliation:
Evans Analytical Group - California, 810 Kifer Road, Sunnyvale, CA 94086, U.S.A
Larry Wang
Affiliation:
Evans Analytical Group - California, 810 Kifer Road, Sunnyvale, CA 94086, U.S.A
Get access

Abstract

The calibration factors are examined for determination of boron (B) and phosphorus (P) in solar grade silicon samples in the new generation of high resolution fast-flow glow-discharge mass spectrometers (FF-GDMS). It is shown that using the generalized calibration factors from the Standard RSF table, the relative errors observed in the determination of these analytes is not acceptably small for photovoltaic applications. The certified B and P values in NIST SRM 57a Si metal sample do not have the confidence intervals, which would be adequate for refining these calibration factors to the acceptable levels. Thus, well-characterized single crystalline Si wafers with known boron and phosphorus contents traceable to NIST reference materials (SRM 2133 and SRM 2137) were used for accurate calibrations and for establishing good analytical procedures for measurements of wide variety of Si sample forms. The obtained results for these important analytes using the new FF-GDMS procedure are compared to other characterization techniques commonly used in this industry.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1123: Symposium P – Photovoltaic Materials and Manufacturing Issues , 2008 , 1123-P01-08
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hockett, R. S. in Proceeding of the 18th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, edited by Sopori, B. L., published by NREL 2008, pp. 48–59.Google Scholar
2. Wang, L. and Hockett, R.S. in Proceedings of 23rd European Photovoltaic Solar Energy Conference 2008, pp. 1209–1212 Google Scholar
3. Michellon, C., Putyera, K., Kasik, M. and Hockett, R.S. in in Proceedings of 23rd European Photovoltaic Solar Energy Conference 2008, pp. 2328–2331.Google Scholar
4. Venzago, C., Campe, H.v. and Warza, W., in Proceedings of 11th European Photovoltaic Solar Energy Conference 1992, pp. 484–486.Google Scholar
5. SEMI PV1-0309 - Test Method For Measuring Trace Elements in Photovoltaic-Grade Silicon by High-Mass Resolution Glow Discharge Mass SpectrometryGoogle Scholar
6. Hinrichs, J., Hamester, M. and Rottman, L., Thermo Fisher Scientific, www.thermo.com com, Application Note: 30164.Google Scholar
7. Sabatino, M. Di, Dons, A.L., Hinrichs, J., Lohne, O. and Arnberg, L., in Proceedings of the 22nd European Photovoltaic Solar Energy Conference 2007, pp 271–276.Google Scholar