Hostname: page-component-848d4c4894-ttngx Total loading time: 0 Render date: 2024-05-17T16:49:48.580Z Has data issue: false hasContentIssue false
  • English
  • Français

Bonding Silicon Devices on Diamond Heat Spreaders

Published online by Cambridge University Press:  10 February 2011

W. D. Fan ,
K. Jagannadham  and
J. Narayan
W. D. Fan
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695
K. Jagannadham
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695
J. Narayan
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695
Get access

Abstract

We have developed diamond heat spreaders and bonding technology to silicon device structure. Diamond films were grown on molybdenum and Si substrates using hot filament chemical vapor deposition. Tin or gold-tin solders were used for bonding. Bonding of silicon on diamond was carried out at 20 Torr with hydrogen ambient and a temperature between 300 to 400°C for half hour. The diamond films were characterized by Raman spectroscopy and scanning electron microscopy. Interfaces between silicon and diamond films Were examined by scanning electron microscopy and energy dispersive spectroscopy. Pull-tests were used to determine the strength of the bonding between the silicon substrate and the diamond film. Bonding is improved with special metallization procedure using Ti and Cu films on the silicon substrate and Ti and Au or Cu films on the diamond film. Mechanisms of improvement of bonding due to metallization layers are discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 416: Symposium DD – Diamond for Electronic Applications , 1995 , 211
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Iacovangelo, C. D., DiConza, P. J., Jerabek, E. C., and Zarnoch, K. P., in Advanced Metallization for Devices and Circuits-Science, Technology and Manufacturability Symposium, edited by Murarka, S. P., Katz, A., Tu, K. N., and Maex, K. (Pittsburgh, Pennsylvania, 1994), P.401.Google Scholar
2. Norwood, D., Worobey, W., Peterson, D., and Miller, D., 1993 Proceedings, 43rd Electronic Components and Technology Conference, P. 910.Google Scholar
3. Kuttel, O. M., Schaller, E., Osterwalder, J., and Schlapbach, L., Diamond and Related Materials 4 (1995) P.612.Google Scholar
4. Chilakamarri, P., Meyyappan, I., Naseem, H. A., and Brown, W. D., in Electronic Packaging Materials Science VII Symposium, edited by Borgesen, Peter, Jensen, Klavs F., and Pollak, Roger A. (Pittsburgh, Pennsylvania, 1994), P. 195.Google Scholar
5. Bachi, A., Kolawa, E., Vandersande, J. W., and Nicolet, M-A., in Applications of Diamond Films and Related Materials: Third International Conference,1995, edited by Feldman, A., Tzeng, Y., Yarbrough, W. A., Yoshikawa, M., and Murkawa, ( National Institute of Standards and Technology, 1995) P. 157.Google Scholar
6. Katz, A., Balocchi, F., Lane, E., Lee, C. H., Hall, C., Doting, J., Grijsbach, C., and Harris, K., J. Appl. Phys. 75 (1994), P. 563.Google Scholar